MSD 6M-2L Marine Ignition with Rev Limiter

• MSD’s popular 6M-2 with a built-in rev-limiter
• Multiple sparks improve starting, throttle response and idle quality
• Circuitry is potted for a weather-proof housing
• Weathertight connectors protect wiring from water and chemicals

What do you get when you add a rev limiter to the MSD’s already bullet-proof 6M-2 Marine Ignition? The MSD 6M-2L! This ignition is designed for performance marine applications where a high energy and reliable ignition is a necessity. The capacitive discharge (CD) multiple sparks from the 6-series circuitry ensures easier starting, improved performance and reduced plug fouling while idling.

The MSD 6M-2L has the same mounting footprint as the original unit, so it will easily fit into existing brackets. The proven Soft-Touch rev limiting action is set using our marine rpm modules so you’ll be able to set a rev limit exactly where your engine needs it.

The 6M-2L is built to deal with constant high rpm and load conditions unique to marine applications. To protect the 6M-2L’s electrical circuitry from direct water contact, the entire unit is potted with red polyurethane. This material prevents the electrical components from coming into contact with water or other chemicals that could cause damage. Weathertight connectors with multi-ribbed seals are unaffected by water, oil, gasoline and most other chemicals associated with boats.

The 6M-2L can be triggered by either a magnetic pickup (distributor or crank trigger), amplifier or by a breaker point distributor. The cable harness has the proper connector so you can plug the 6M-2L directly into one of MSD’s Pro-Billet Marine Distributors.

MSD 8.5 MM Spark Plug Wire Set

Sets include terminals for engines with early type (socket) and late type (HEI "spark plug top") distributor caps.90º plug boots and terminals are factory installed on one end.

MSD 8.5 MM Spark Plug Wire Set

All Big Block Chevy with socket distributor cap (wires below header/exhaust manifold).

MSD Advance Spring Kit

The MSD Distributor Advance Kits are the same kits that come with your MSD Distributor The kit contains an assortment of springs, advance limit bushings, and a mechanical advance lockout screw.

MSD Billet Marine "Ready-To-Run Distributor Ignition System - Chevy V8

This is positively the longest awaited product to come but definitely worth the wait. These all new ready-to-run marine distributors do NOT require any additional box to operate. They are a stand alone style ignition in one convenient package. Although they do not share the performance advantages of their sibling the 6M-2 series systems, they do provide the ultimate in maintenance free magnetic ignition reliability. Their increased output of the internal ignition amplifier will out perform stock ignitions while smoothing out an engines idle, improve starting and provide a higher more adjustable operating range. Meets all USCG requirements.

MSD Billet Marine "Ready-To-Run Distributor Ignition System - Ford 429/460 V8

This is positively the longest awaited product to come but definitely worth the wait. These all new ready-to-run marine distributors do NOT require any additional box to operate. They are a stand alone style ignition in one convenient package. Although they do not share the performance advantages of their sibling the 6M-2 series systems, they do provide the ultimate in maintenance free magnetic ignition reliability. Their increased output of the internal ignition amplifier will out perform stock ignitions while smoothing out an engines idle, improve starting and provide a higher more adjustable operating range. Meets all USCG requirements.

MSD Blaster SS Series Coil

This coil packs a powerful punch especially for its compact size. This is due to a very efficient windings design that create less loss of stored energy which results in more spark energy to the spark plugs. The windings are encased in a epoxy compound for vibration resistance that allows the coil to be mounted in any position.

MSD Bronze Distributor Gear

These distributor gears fit Chevy V-8's and V-6's Made of aluminum bronze with 5% nickel or ductile iron for strength Resists wear and breakage, even when used with a heavy duty oil pump Fits MSD's distributors with .500" shafts.

MSD Chrome Ignition Coil Bracket

The chrome-plated MSD Coil Bracket offers easy, universal mounting for standard size ignition coils up to 2-1/4" diameter, including all MSD Blaster 2 Coils For secure tightening, the MSD Coil Bracket uses a bolt and nut combination instead of the easily-stripped, self tapping screw common on other manufacturer's brackets.

MSD Severe Duty Coil Wire Retainer

The MSD coil wire retainer solves the problem of the coil wire coming loose from the tower of the coil With this combination the coil wire cannot vibrate loose during severe boating condition.

MSD Factory Ignition Module Tachometer Adapter

The perfect addition to your performance ignition.

If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.

MSD High Performance Chrome Blaster 2 Coil Kit With Resistor

If you're looking to upgrade your stock coil or want to complement the performance of your MSD ignition, our Blaster Coils are the right choice.

MSD High Performance Red Blaster 2 Coil Kit, No Resistor

If you're looking to upgrade your stock coil or want to complement the performance of your MSD ignition, our Blaster Coils are the right choice.

MSD High Performance Red Blaster 2 Coil Kit With Resistor

If you're looking to upgrade your stock coil or want to complement the performance of your MSD ignition, our Blaster Coils are the right choice.

MSD Red Blaster 3 Coil with Power Tower Male Plug Terminal

If you're looking to upgrade your stock coil or want to complement the performance of your MSD ignition, our Blaster Coils are the right choice.

Blaster Coils for points, electronic or MSD ignitions: With a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil The following Blaster Coils are supplied with a 0.8 ohm ballast resistor plus a terminal and boot to fit most applications Mallory Unilite applications also require the ballast resistor.
Points ignition systems require this ballast resistor included with kit in addition to any original resistor or resistor wiring.

Note: The ballast is not necessary if an MSD 6 or 7 series ignition control is being used with the points distributor.

MSD's "BEST" High Vibration Blaster Coil

If you're looking to upgrade your stock coil or want to complement the performance of your MSD ignition, our Blaster Coils are the right choice. The sturdy metal housing of the High Vibration Coil is completely potted with a premium grade epoxy to completely encase the coil's primary and secondary windings.

MSD Marine Pro-Billet Distributor - V8 Chevy

"Basic" MSD Ignition Package - Ford 429/460 V8

This standard basic version of the popular "MSD" ignition system offers some great economic options to boaters. The basic kit consists of the following components:

• (1) MSD 85806 Pro-Billet Marine Distributor
• (1) MSD 6560 6-M Series Multi-Spark Ignition Control Box
• (1) MSD 8202 Standard Blaster Coil
• (1) Hardin Marine 8 MM Spark Plug Wire Set

Over our 40 years of engine development we have worked with some of the worlds most innovative and technologically advanced company's. From those relationships came many new alliances and product advancements such as the introduction of the "multiple spark discharge" ignition systems from Autotronics Controls. This advanced technology has produced an ignition system powerful enough to prevent spark plug fouling, faster RPM advancement, quicker acceleration, and increased peak horsepower, while greatly improving the overall drivability of any boat yet tough enough to withstand the harshest marine environments. These systems are 100% certified for marine use to comply with all USCG requirements. We are proud to be able to off to you the finest marine ignition system available today.

"Basic" MSD / Mallory Ignition Package - Olds 455 V8

This standard basic version of the popular "MSD" ignition system offers some great economic options to boaters. The basic kit consists of the following components:

• (1) Mallory YLM501GV Billet Marine Distributor
• (1) MSD 6560 6-M Series Multi-Spark Ignition Control Box
• (1) MSD 8202 Standard Blaster Coil
• (1) Hardin Marine 8 MM Spark Plug Wire Set

Over our 40 years of engine development we have worked with some of the worlds most innovative and technologically advanced company's. From those relationships came many new alliances and product advancements such as the introduction of the "multiple spark discharge" ignition systems from Autotronics Controls. This advanced technology has produced an ignition system powerful enough to prevent spark plug fouling, faster RPM advancement, quicker acceleration, and increased peak horsepower, while greatly improving the overall drivability of any boat yet tough enough to withstand the harshest marine environments. These systems are 100% certified for marine use to comply with all USCG requirements. We are proud to be able to off to you the finest marine ignition system available today.

MSD "Total Performance Package" Ignition System Kit - Chevy V8 (Standard Deck)

When it comes to high performance upgrades we recognize not only do you want easy installation but you also want to be assured that you have every part you need to do the job right, and you want the savings that comes from buying it all in kit form. While many companies try and offer partial kits, none to our knowledge, give you the same components at the every day discounted prices that we do. That's why the "Total Performance Package" consists of a:

• MSD Billet Marine Distributor
• MSD 6M-2L Ignition Control Box with Built-In Rev Limiter
• High Vibration Coil (no standard coil in this kit)
• 8mm Hardin Marine Wire Set
• Stainless Steel Head Mounting Bracket

If you're the kind of boater that's looking for the "Total Performance Package" it's here now.