Big Tube FF Gasket

Big Tube Rope Seal Clamp Assembly Kit

• (1) Jumper Hose 1.375" ID, 180 Degree
• (2) Stainless Steel Hose Clamp #24
• (1) Big Tube V-Band Clamp
• (1) 1/4-20 x 3.5" Hex Screw
• (1) Rope Seal, High Temp
• (1) Bridge Spacer, for 4.5" ID Tailpipe

Big Tube/Big E-Top Clamp & Gasket Kit

• (1) Jumper Hose 1.375" ID, 180 Degree
• (2) Stainless Steel Hose Clamp #24
• (1) Big Tube V-Band Clamp
• (1) Big Tube Flex Flare Gasket
• (1) Rope Seal, High Temp

Direct Mercruiser replacement for your 496 Mag or 496 HO engine.

No additional custom tails to buy. You don’t need to remove your stock exhaust hose to install this kit, a true plug and play system.

• 1 7/8" id primary to get peak horse power and torque.
• Mandrel bent and formed from High quality 316L grade material.
• Fully post annealed to reduce stresses built up in the header during the manufacturing process
• Seamless water jacketed header. No welded inner primaries or water jacketed tubes to crack and leak.
• More water jacketed protection than your stock exhaust.
• Approved by Mercruiser to not void warranty on the motor, with the exception of water reversion.
• Same high quality semi automated welding as used on all racing applications
• Cool collar patented flange design to eliminate the risk of getting water in the motor by the head flange
• This kit is price competitive to other aluminum/stainless manifold systems with superior performance and extended life span in harsh marine environments.
• No cast parts to crack, all CMI collectors are forged from American made stainless steel.
• Works on 34.5" drive centers
• Brings a race look to your stock engine.
• Sophisticated engineering leaves your stock oil lines in place and only requires relocating your oil filter with a supplied bracket.
• Step by step, do it yourself instructions using Mercury supplied engine schematics.
• Exhaust Water Temperature Bungs Installed as Standard Equipment.

The CMI 496 Sport Tube Performance Package delivers improved performance across the entire operating range of any 496 engine package. When applied to a stock 496 engine, this package will help to increase horsepower, boost mid-range torque, improve fuel economy across the power curve and enhance the engine's overall running quality. The package comes complete with all required mounting hardware plus CMI's exclusive 496 Relocation Kit, which includes all brackets, hoses and hardware needed to make relocation of select engine components easier.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy E-Top Platinum Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy E-Top Platinum Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

This Kit includes an upgrade to a Stainless Steel Water Distribution Tree.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy Unitop Platinum Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

Note: This system does not have tailpipes. It's pipes are set up for standard Bravo hole locations.

CMI's Gen-X Headers are a direct factory replacement for Mercury Racing HP525EFI, HP600SCi and HP700SCi engines.

The new design increases water fill keeping the headers full at all time, creating cooler temperatures, which leads to improved longevity and a little extra horsepower.

Featuring more equalized primaries for improved performance, the straight-back headers with downturn collectors work with existing tailpipes and are easy to install. Constructed of quality 316L domestic stainless steel makes for one tough header with a sleek stylish look.

Here is just a sampling of the popular exhaust manifold gaskets that weoffer.  Each gasket is designed to withstand the high temperatures ofmarine exhaust applications.  Gaskets are sold individually.

LS Exhaust Gasket

Sport Tube/Sweeper Flex Flare Gasket fits Merc 525/600/700 Gen-X, Hurricane Lite.

Clamp Kit for Mercury Tailpipes

• (1) Jumper Hose 1.125" ID, 180 Degree. Mercury
• (2) Stainless Steel Hose Clamp #16
• (1) Mercury Tailpipe V-Band Clamp
• (1) Gasket kit for Mercury Tailpipes

Molded Rubber Distributon Tube

Rope Seal Clamp Assembly Kit

• (1) Jumper Hose 1" x 6"
• (2) Stainless Steel Hose Clamp #14
• (1) V-Band Clamp for Standard Rope Seal
• (1) 1/4-20 x 3.5" Hex Screw and Nut
• (1) Rope Seal, High Temp
• (1) Bridge Spacer, for 4" ID Tailpipe

Sport Tube/Sweeper Clamp Kit

• (1) Jumper Hose 1.125" ID, 180 Degree
• (2) Stainless Steel Hose Clamp #16
• (1) Sweeper V-Band Clamp
• (1) Sweeper Tail Gasket