Search:  
Previous  Up  Next" 

CD-1 Capacitive Discharge Ignition System for Marine Applications


CD-1 Capacitive Discharge Ignition System for Marine Applications


CD-1 Capacitive Discharge Ignition System for Marine Applications 

110-103003

E-mail this product to a friend E-mail this product to a friend

Daytona Sensors CD-1 Capacitive Discharge Ignition Box and Coil System for Marine Applications
  • 135 mJ spark energy output.
  • Built-in data logging capability with 16 Mbit DataFLASH memory.
  • Dedicated input terminals for launch RPM and manifold pressure.  
  • One general purpose input and two general purpose input/output terminals. Inputs can be programmed for high gear retard, burnout RPM limit, vehicle speed sensor, and throttle position sensor.
  • Outputs can be programmed for RPM window switch, nitrous system activation, and multi-gear shift light functions.
  • Fully encapsulated construction using surface mount electronics. Waterproof and highly resistant to vibration and shock.  12 pin Deutsch connector used for signal connections.
  • Compact size. Module is 7.0”L x 5.25”W x 1.9”H. Coil is 4.4”L x 3.2”W x 3.0”H                            
  • Highly efficient switching power supply based on US Patents 6518733 and 6636021. Less than 5 amp current draw at 8,000 RPM. Rated for continuous operation at 8,500 RPM and 85º C (185º F).
  • Compatible with 8 cylinder marine engines with distributor type ignition.
  • Digitally set RPM limit with 100 RPM steps from 3,000 to 9,900 RPM.
  • Seven switch selectable advance curves and a fixed timing mode cover most Mercury marine high performance applications.
  • PC programmable idle stabilization feature.
  • PC programmable advance features ranging from a simple RPM based advance curve to a 3D timing map with boost proportional retard.   
  • Dedicated input terminals for manifold pressure and an externally activated 0-18 degree retard feature.
  • Three general purpose input/output terminals. Two inputs are reserved for data logging. An additional input/output terminal can be used for data logging or as an RPM window switch.
  • Module and coil are both certified to meet the ignition protection requirements of the NMMA, the USCG, ISO 8846 and SAE J1171 SAE standards for marine applications. 
MSRP: $595.99
Your Price: $549.99 
You Save: 8% off MSRP!

Quantity:   

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.



CD-1 USB Interface Connection Cable

CD-1 USB Interface Connection Cable

Daytona Sensors CD-1 USB Interface Connection Cable

Connect your CD-1 Ignition Box to a laptop with this USB connection cable.

CD-1 USB Interface Connection Cable
CD-1 USB Interface Connection Cable
River Animals T-Shirt
River Animals T-Shirt
High Performance Fuel Pump Upgrade BBC Gen 5 & 6 Engines
High Performance Fuel Pump Upgrade BBC Gen 5 & 6 Engines
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
CD-1 USB Interface Connection Cable

CD-1 USB Interface Connection Cable

Daytona Sensors CD-1 USB Interface Connection Cable

Connect your CD-1 Ignition Box to a laptop with this USB connection cable.
No Recently Viewed Products