Move Previous  Page:1 … 3 4 5 6 7  Move Next
Stainless Steel Steering Wheel, 20

Stainless Steel Steering Wheel, 20" Diameter, 10 Degree Dish, 5 Spoke

Non-Magnetic Stainless Steel Steering Wheel, 20" Diameter, 10 Degree Dish, 5 Spoke

Starting From: $129.99
Part Number: 623-V44*

STANDARD ROTARY TILT HELM

Standard Rotary Tilt Helm

Standard Rotary Tilt Helm

This helm along with the X52 Tilt Mechanism will transform your steering from a standard fixed post to tilt-able post. This will allow for better driving comfort.
Starting From: $77.99
Part Number: 623-T81FC*

Tilt Helm Mechanism

Tilt Helm Mechanism

Tilt Helm Mechanism

Is your helm not quite at the angle you want? Then this is your answer. The X52 tilt helm mechanism only fits Uflex G96 Rack and T81FC Rotary Tilt Helms. Check the related products for helms and cable kits.
Starting From: $113.99
Part Number: 623-X52*

UFLEX B183, B184 & B85 Series Controls

UFLEX B183, B184 & B85 Series Controls

B183, B184 and B85 Series Controls

Single lever / dual actioncontrol to operate both throttle and shift.
Suitable for any type of boats with outboard,inboard or I/O power plants.

FEATURES

- Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
- Can be installed horizontally or vertically, on the starboard or port side of the boat
- Provided with a brake tension release system adjustable from outside
- Pull-out handle disengages shift for warm-up
- Neutral safety switch X12 - 34543 Q (for B183, B184, B184CB, B85) or X50 - 38817 S(for B184Merc) prevents in-gear starting
- Exceeds EN ISO 11547 standards when X12 or X50 safety switch is installed
- All models are provided with positive lockin neutral to prevent accidental gear engagement
- B184 models are provided with a power trim switch conveniently located in the handle grip that enables for easy tilting of the engine

For use with:

- All Ultraflex control cables except C4, C36 and MACH36
- Mercury®\ current OMC®\ Yamaha® \ Suzuki® Honda® \ Volvo® style cables
- 33C style cables

Ultraflex C5, C16, MACH5 and Mercury® cables require K35 - 34730 U connection kit
Ultraflex C22 and C23 cables require KB1- 39964 L connection kit

MODELS
B183
-
Provided with a positive lock-in neutral
B184 -
Provided with a positive lock-in neutral and trim switch
B184CB -
Provided with a positive lock-in neutral and trim switch
B85 -
Standard model, smooth design for use on sailboats. Provided with a positive lock-in neutral.
B184M -
For MERCURY® or MERCRUISER® engines.
It includes X50 - 38817 S neutral safety switch for trim and tilt functions and K35 - 34730 U connection kit for Mercury® cables.

Starting From: $176.99
Part Number: 623-B*

UFLEX B310 Series Side-Mount Shifters

UFLEX B310 Series Side-Mount Shifters

B310 Series Side-Mount Controls

Single lever / dual action control to operate both throttle and shift.
Suitable for any type of boats with outboard, inboard or I/O power plants.

FEATURES

- Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
- Can be installed horizontally or vertically, on the starboard or port side of the boat
- Provided with a brake tension release system adjustable from outside
- Pull-out handle disengages shift for warm-up
- Neutral safety switch X12 - 34543 Q prevents in-gear starting
- Exceeds EN ISO 11547 standards when X12 safety switch is installed
- All models are provided with positive lockin neutral to prevent accidental gear engagement
- All models are provided with a power trim switch conveniently located in the handle grip that enables for easy tilting of the engine

For use with:

- All Ultraflex control cables except C4, C36 and MACH36
- Mercury®\ current OMC®\ Yamaha® \ Suzuki® \ Honda® \ Volvo® style cables
- 33C style cables

Ultraflex C5, C16, MACH5 and Mercury® cables require K35 - 34730 U connection kit
Ultraflex C22 and C23 cables require KB1 - 39964 L connection kit

Starting From: $341.99
Part Number: 623-B310*

UFLEX B89 & B90 Series Side-Mount Control

UFLEX B89 & B90 Series Side-Mount Control

B89 and B90 Series Controls

Single lever / dual action control to operate both throttle and shift.
Suitable for any type of boats with outboard, inboard or I/O power plants.

FEATURES

- Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
- Can be installed horizontally or vertically, on the starboard or port side of the boat
- Made of painted marine aluminium
- Pull-out handle disengages shift for warm-up
- Neutral safety switch X12 - 34543 Q prevents in-gear starting
- Exceeds EN ISO 11547 standards when X12 safety switch is installed
- Provided with a positive lock-in neutral to prevent accidental gear engagement

For use with: 

- All Ultraflex control cables except C22, C4, C36 and MACH36
- Mercury® \ current OMC®\ Yamaha® \ Suzuki® \ Honda® \ Volvo® style cables
- 33C style cables

Ultraflex C5, C16, MACH5 and Mercury® cables require K35 - 34730 U connection kit.
To connect C14 and MACH14 cables and current OMC® cable to engine, use K51 - 32526 N connection kit.

Starting From: $196.99
Part Number: 623-B*

UFLEX Electro-Mechanical Trim Tabs

UFLEX Electro-Mechanical Trim Tabs

Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions. These tabs have been specifically designed for easy installation using a quick connect bracket-actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

  • Hardened steel free wheeling ballscrew
  • EASYJOY: prompt and easy control with the innovative use of a Joystick (sold separate)
  • AUTO LINE-UP: automatic flap re-alignment function
  • Completely sealed and fully submersible tab actuators: maximum protection garanteed by dual seals and a rubber bellow
  • Snap-in system (PATENTED) with protected harness for an easy installation
  • Stainless steel ram and tabs
  • System requires no maintenance
  • Voltage:12V DC
  • Actuator total length (full closed): 11.8” (301 mm)
  • Waterproof: IP68 protection
Recommended Applications:
 BOAT LENGTH  BOAT LENGTH (m)   TAB SIZE
(length x width) 
 TAB SIZE (CM) 
 14' - 18'  4,5 - 5,5  9" x 9"  22,8 x 22,8
 16' - 25'  5,0 - 8,0  12" x 9"  30,5 x 22,8
 18' - 30'  5,5 - 9,0  12" x 12"  30,5 x 30,5
 26' - 36'  8,0 - 11,0  18" x 12"  45,7 x 30,5
Starting From: $552.99
Part Number: 623-MTB12*

UFLEX Replacment Trim Tab Plates for Bennett, Lenco and Uflex

UFLEX Replacment Trim Tab Plates for Bennett, Lenco and Uflex

Stainless Steel Polished Finish. Replacement Tabs for Bennett, Lenco or Uflex Trim Tabs of the same size.

Starting From: $100.99
Part Number: 623-P*

Uflex Single Cable Rotary Tilt Steering Helm

Uflex Single Cable Rotary Tilt Steering Helm

Uflex Single Cable Rotary Til Steering Helm (X52 Tilt Mechanism required but not included)

Starting From: $89.99
Part Number: 623-T81FC*

Uflex T71FC - 38867 H - Single Cable Steering Helm

Uflex T71FC - 38867 H - Single Cable Steering Helm

Uflex T71FC - 38867 H - Single Cable Steering Helm

Starting From: $58.99
Part Number: 623-T71FC*

Uflex T73FC - Zerotorque Rotary Helm

Uflex T73FC - Zerotorque Rotary Helm

Uflex T73FC - Zerotorque Rotary Helm

Starting From: $117.99
Part Number: 623-T73FC*

Uflex T83FC - Zerotorque Rotary Tilt Helm

Uflex T83FC - Zerotorque Rotary Tilt Helm

Uflex T83FC - Zerotorque Rotary Tilt Helm (X52 Tilt Mechanism Required but Not Included)

Starting From: $167.99
Part Number: 623-T83FC*

Uflex T83FC - Zerotorque Rotary Tilt Helm with X52 Tilt Mechanism

Uflex T83FC - Zerotorque Rotary Tilt Helm with X52 Tilt Mechanism

Uflex T83FC - Zerotorque Rotary Tilt Helm with X52 Tilt Mechanism

Starting From: $217.99
Part Number: 623-T83FCT*

Ulysses Series Electrical Linear Hatch Actuator

Ulysses Series Electrical Linear Hatch Actuator

Ulysses 7" & 12" Stroke Hatch Lifter

  • 7" Model Overall Length 19.2", 12" Model Overall Length 23.9", both 1.3" diameter
  • Single installation only
  • Pull and push maximum load: 144 lbs
  • Pull and push maximum load is recommended not to be exceeded
  • Supplied with all mounting hardware
  • Aluminum ram
  • Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position
  • IP 65 protection rated
  • 12V DC
Starting From: $350.99
Part Number: 623-U*

Universal 10-32 Thread Cable, Brass Hardware

Universal 10-32 Thread Cable, Brass Hardware

Universal 10-32 Threaded Cable. Brass Hardware. 3.4” (87mm) Stroke. 0.27” (7mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories.

Starting From: $19.99
Part Number: 623-C2X*

V32 Black Ultraflex Steering Wheel

V32 Black Ultraflex Steering Wheel

V32 Black Ultraflex Steering Wheel

Starting From: $24.99
Part Number: 623-V32N*

V33G Black Ultraflex Steering Wheel

V33G Black Ultraflex Steering Wheel

V33G Black 4 Spoke Ultraflex Steering Wheel

Starting From: $26.99
Part Number: 623-V33N*

V33G Gray Ultraflex Steering Wheel

V33G Gray Ultraflex Steering Wheel

V33G Gray 4 Spoke Ultraflex Steering Wheel

Starting From: $26.99
Part Number: 623-V33G*

V45 Black Soft Touch Ultraflex Steering Wheel

V45 Black Soft Touch Ultraflex Steering Wheel

V45 Black 3 Spoke Soft Touch Ultraflex Steering Wheel

Starting From: $44.99
Part Number: 623-V45*

V45 Grey Soft Touch Ultraflex Steering Wheel

V45 Grey Soft Touch Ultraflex Steering Wheel

V45 Grey 3 Spoke Soft Touch Ultraflex Steering Wheel

Starting From: $44.99
Part Number: 623-V45GW*

Move Previous  Page:1 … 3 4 5 6 7  Move Next